Login

Register

Login

Register

Roller Blinds

STEP-BY-STEP GUIDE: HOW TO INSTALL ROLLER BLINDS

  1. What you probably need: A cement OR power drill, a hammer, 4 x screws, 4 x wall plugs (wood or plastic), a measuring tape, carpenter’s level, a screwdriver (Flatblade OR Philips head depending on screw type).
  2. To begin, place the bracket into the chain end control.
  3. Position the blind 5 inches above the window and draw a line according to the bracket size. Repeat for the other side of the blind.
  4. Mark the spot where you will screw the bracket onto the wall.
  5. Use your power drill to drill into the wall and insert a wall plug.
  6. Place the bracket and screw onto the wall.
  7. Open the blinds holder and insert the chain winder end into the chain end bracket.
  8. Lock the bracket.
  9. Pull the blind down fully and back up fully a couple of times to ensure that the blind is running smoothly.

Custom Now

ERB 3013

Add some sophistication to your office with this beautiful colour.

ERB 3262

Use this soft blue pastel hue for the kitchen. Match it with a bright coloured wall even.

ERB 3870

Cool and simple grey. The perfect choice for a grand and comfortable living room.

ERB 3871

Dark grey tones is the best colour to add sophistication into a home or office environment.

ERB 3941

This royal blue will go well with modern furniture of a living room.

ERB 3951

The colour of nature adds a classy touch to a study room, or the hall of a home.

LRB 4365

Another wonderful and classy option with that signature texture from our Blackout series.

LRB 4014

An earthy, textured finish adds to the character of the living room or office.

OPERATING SYSTEM

CHAIN

SYSTEM M5 M7 M11
Control End
  • Mineral filled nylon 6
  • Spring lock friction
  • Securing pin
  • Choice of nylon or metal chain
  • Mineral filled nylon 6
  • Spring lock friction
  • Securing pin
  • Choice of nylon or metal chain
  • Mineral filled nylon 6
  • Spring lock friction
  • Securing pin
  • Choice of nylon or metal chain
Tube 38mm 38mm 38mm
Bracket Metal Metal Metal
End Plugs
  • Spring loaded action (min. gap)
  • Security of fixing

 
  • Spring loaded action (min. gap)
  • Security of fixing

 
  • Spring loaded action (min. gap)
  • Security of fixing

 
Maximum Recommended Operating Weight 5kg 5kg 5kg

SPRING

SYSTEM NORMAL HEAVY DUTY
Control End
  • Mineral filled nylon 6 & metal
  • Metal ball lock friction
  • Securing pin
  • Mineral filled nylon 6 & metal
  • Metal ball lock friction
  • Securing pin
Spring Metal with 12mm & 10mm nylon & aluminium combo tube Metal with 12mm & 10mm nylon & aluminium combo tube
Tube 35mm 42mm
Bracket Metal Metal
End Plugs Gear loaded action (Control max. length stop) Gear loaded action (Control max. length stop)
Maximum Recommended Operating Weight 3kg 6kg

Zebra Blinds

STEP-BY-STEP GUIDE: HOW TO INSTALL ZEBRA BLINDS

  1. What you probably need: A cement OR power drill, a hammer, 4 x screws, 4 x wall plugs (wood or plastic), a measuring tape, carpenter’s level, a screwdriver (Flatblade OR Philips head depending on screw type).
  2. To begin, attach the spring clips to the L-shaped brackets.
  3. Mark the point on the wall with a pencil and screw the spring clips directly onto the wall above the window frame.
  4. Position the top of the headrail against the spring clips and click into place, starting with the end part of the headrail first.
  5. Pull the blind down fully and back up fully a couple of times to ensure that the blind is running smoothly.

Custom Now

ZEBRA GH03 ZE 3001

Made of high quality fabric with soft hues to complement any room.

ZEBRA GH03 ZE 3002

A brown almost wood like pattern adds to the sophistication of a room or living room.

ZEBRA GH03 ZE 3005

A beautiful wood tone to go beautifully with other earthy colour hues of your home interior.

ZEBRA GH03 ZE 3004

A sophisticated dark gray hue perfect for any room.

Venetian Blinds 25mm

STEP-BY-STEP GUIDE: HOW TO INSTALL VENETIAN BLINDS

  1. What you probably need: A cement OR power drill, a hammer, 4 x screws, 4 x wall plugs (wood or plastic), a measuring tape, carpenter’s level, a screwdriver (Flatblade OR Philips head depending on screw type).
  2. Use a pencil or marker to mark the position of the aligned brackets according to the length of the blind.
  3. Use your power drill to screw the brackets in.
  4. Insert the headrail of the blind into the brackets.
  5. Use the hammer to tighten the bracket clip.
  6. Test the cordlock on the left by pulling on the string to roll the blinds up or down.
  7. Open or close the blinds by pulling on the right string.

Custom Now

BLUE 8602

Brighten up the boardroom with this blue colour option.

Brown 8013

This light brown colour will be great for hospitals or office cubicles.

Green 8938

Soft green hues are best used in offices.

Grey 8116

The classic soft grey Venetian blinds has long been the preferred choice.

OPERATING SYSTEM

COMPONENT SPECIFICATION MATERIAL ADVANTAGES
Headrail 27mm (W) x 25mm (D) Pre-coated 0.5mm electro-galvanized steel finish Min. rusting & humidity proof
Bottomrail 25mm (W) x 10mm (D) Pre-coated 0.5mm electro-galvanized steel finish Min. rusting & humidity proof
Slat 25mm (Width)
0.175mm (Pre-coated thickness)
0.2mm (Post-coated thickness)		 High-tensile aluminium of 6011 alloy with thermoform process Optimum mechanical function and durability, able to withstand bending through 180° over a mandreal of 12.5mm radius  without incurring permanent deformation
Tiltrod 2mm radius
3mm flat side		 Hot-dipped galvanised ‘D’ section steel wire Smooth mechanical operation
Tilter Moulded shaft & gear contained within housing Polycarbonate & acetal Self-lubricated for smooth operation
Ladder 2-ply spaced construction, each ring comprising 2 strands spaced across each other Polyester fibre Optimum closure
Polyester Cord 1.5mm diameter Polyester fibre To complement the cordlock
Cordlock 13mm width
20mm height
19mm depth		 Polycarbonate with stainless steel wear plate & nickel plate brass cord roller c/w separating pin Durable performance, pin prevents cord from twisting
Headrail hardware 24mm width
21mm height
33mm depth		 Translucent engineered grade plastics Smooth operation and durable

Venetian Blinds 50mm

STEP-BY-STEP GUIDE: HOW TO INSTALL VENETIAN BLINDS

  1. What you probably need: A cement OR power drill, a hammer, 4 x screws, 4 x wall plugs (wood or plastic), a measuring tape, carpenter’s level, a screwdriver (Flatblade OR Philips head depending on screw type).
  2. Use a pencil or marker to mark the position of the aligned brackets according to the length of the blind.
  3. Use your power drill to screw the brackets in.
  4. Insert the headrail of the blind into the brackets.
  5. Use the hammer to tighten the bracket clip.
  6. Test the cordlock on the left by pulling on the string to roll the blinds up or down.
  7. Open or close the blinds by pulling on the right string.

Custom Now

TEAK

Classic sophistication come in the unmistakable character of teak wood. A great design feature for the patio bar, a lounge or living room.

Ramin

Soften things down but don’t lose the sophisticated lifestyle with this tone.

Mahogany

Who doesn’t like the colour of Mahogany? Use this in a study or the living room to soothe and comfort your soul.

OPERATING SYSTEM

COMPONENT SPECIFICATION MATERIAL ADVANTAGES
Headrail 27mm (W) x 25mm (D) Pre-coated 0.5mm electro-galvanized steel finish Min. rusting & humidity proof
Bottomrail 25mm (W) x 10mm (D) Pre-coated 0.5mm electro-galvanized steel finish Min. rusting & humidity proof
Slat 25mm (Width)
0.175mm (Pre-coated thickness)
0.2mm (Post-coated thickness)		 High-tensile aluminium of 6011 alloy with thermoform process Optimum mechanical function and durability, able to withstand bending through 180° over a mandreal of 12.5mm radius  without incurring permanent deformation
Tiltrod 2mm radius
3mm flat side		 Hot-dipped galvanised ‘D’ section steel wire Smooth mechanical operation
Tilter Moulded shaft & gear contained within housing Polycarbonate & acetal Self-lubricated for smooth operation
Ladder 2-ply spaced construction, each ring comprising 2 strands spaced across each other Polyester fibre Optimum closure
Polyester Cord 1.5mm diameter Polyester fibre To complement the cordlock
Cordlock 13mm width
20mm height
19mm depth		 Polycarbonate with stainless steel wear plate & nickel plate brass cord roller c/w separating pin Durable performance, pin prevents cord from twisting
Headrail hardware 24mm width
21mm height
33mm depth		 Translucent engineered grade plastics Smooth operation and durable